CarPro
Essence PLUS 16oz
Non-abrasive Gloss Agent & Top
Coat Jeweler
With Essence PLUS, we introduce you to
the first NON-abrasive solution to repair fine swirls, when an abrasive
correction is not in the cards! While increasing the gloss, Essence PLUS simultaneously
cleanses the surface, leaving a “smooth as glass” feel and amazing hydrophobic
properties! Please note Essence Plus is intended for professional use.
Features:
- High Gloss
Jeweling Coat
- Repairs Nano
Coatings
- Incredible on
bare paint!
- Adds layer of
SiO2 Quartz protection
- Excellent
Hydrophobic Agent
- Produces
Extreme Gloss
- Use with D/A
or by Hand
- Cleans,
glosses, and protects: bare paint, PPF, chrome, and glass
- Formulated
for Professional use on previously coated vehicles
Preparation:
1. Wash with Reset, and
decontaminate with Iron X, Spotless, and if needed TarX 2. Wash and rinse thoroughly.
3. Dry
vehicle and wipe down with CarPro Eraser for clean oil free surface
Via Dual Action Polisher:
1. Prime CarPro Gloss pad with
Essence PLUS
2. Apply with no
pressure in multiple overlapping passes on speed 1-3 across 24” x 24” (60cm x
60cm) section
3. Clean pad with brush
and apply 3 Pea size drops to the pad
4. Move to next section
and repeat steps 2-3
5. Continue around ENTIRE
vehicle in this manner
6. Wipe excess residue off
of entire vehicle
Via Hand:
1. Wash and dry Vehicle
2. Apply a
few pea size dots of Essence PLUS to the applicator
3. Apply in
overlapping figure circular motions across 24” sq. +/- and work into surface
similar to a “polymer sealant” (liquid wax) application method
4. Move to next
section and repeat steps 2-3
5. Continue around
ENTIRE vehicle in this manner
6. Allow to cure for
AT LEAST an hour
7. Easily wipe excess
residue off of entire vehicle.
Precautions:
• On coated
surfaces – If using machine, use only with CarPro Gloss pad
•
On coated surfaces - Avoid “edging” pad into a curve and keep pad flush with
paint
•
Keep container tightly closed after use
•
Keep container out of the sun
•
Test product on inconspicuous area before use
•
Store in cool dry place
•
Keep away from children
•
Do not ingest
•
Not for use as a primer
FAQ: CarPro Essence PLUS
Q. What tool do you expect
Essence PLUS to be used as most?
A. We expect that its most widely used
application will be as a solution to a client that wants aggressive
decontamination service but is unable to afford polishing… Marring from heavy
claying or synthetic clay discs causes marring but with Essence PLUS it can be
easily repaired and protected in one step. To be clear this is NOT the
way we would use it in all scenarios but this is a widely experience challenge
and a solution for it!
PLUS is made for using on TOP of a
damaged coating (or as another type of service on raw paint)
Q. How are they the same?
A. They both contain a Sio2 coating
inside them that has filling capabilities, but Essence PLUS levels existing
damaged coatings by building up. CarPro Essence on the other levels
mostly with abrasives and partially with Sio2 coat.
Q. Can I use Essence PLUS on
top of Essence?
A. Yes!
Q. Can I use Reload over the
top of Essence PLUS?
A. Yes!
Q. Can I use Essence PLUS
underneath CQuartz like I did with Essence?
A. No, this is not a primer like Essence
is and coatings will not bond on top! If used inconjunction with a
coating, this goes on TOP, not bottom.
Q. Can I use Essence PLUS to
repair gloss and hydrophobic to a damaged coating?
A. Yes, depending on the level of damage
you certainly can. That was the primary concept for this product.
In some cases over time or through abuse, a coating can become damaged.
Rather then removing and replacing the coating as your only option, we designed
ES PLUS to provide another option of correcting or extending its life.
Q. If I want to use it on a
damaged coating, should I use a Microfiber pad and machine?
A. No, The Microfiber pad is abrasive and
will remove the coating! You want to use only a CarPro Gloss pad as directed OR
use by hand as directed. If that is not sufficient then you would be
better off switching to CarPro Essence and other methods.
